More GPUs or a Smaller Cache? Tensor Parallelism versus KV Compression for Memory-Bound LLM Serving

Sicherheitsmeldung mit Schweregrad noch nicht bewertet. Technische Details im Tab „Originaltext“; empfohlene Schritte in der Checkliste.

Originaltext der Quelle (nicht übersetzt) – die deutsche Zusammenfassung findest du im Tab „Kurzfassung".

arXiv:2608.23962v1 Announce Type: new Abstract: When an LLM serving deployment runs out of KVcache room, there are two well-established ways out. Tensor parallelism shards the weights and the KV cache across two, four, or eight devices, buying memory headroom at the price of an all-reduce on every layer and a hardware bill that grows with the device count. The algorithms community shrinks the cache in place, with KV quantisation and eviction keeping a single GPU and spending a little quality instead. Compression papers report memory ratios, parallel-scaling papers report throughput curves, and almost nobody puts the two on the same cost axis. We place tensor-parallel configurations (degree 1 to 8) and KV-compressed configurations (16/8/4-bit, keep-ratios down to 0.25) on one costnormalised axis, cost per million tokens against latency, using a profiled simulator calibrated on A100, A40, and H100 hardware, and we go looking for the cost-equivalence crossover. We do not find one. Across two models (Llama-2 at 7B and 70B), three GPU types, and every level of memory relief we could construct, compression is cheaper by 1.20x to 2.00x. A 7B model on an 80 GB device cannot exhaust its KV budget within its own context window, and the boundary that decides between the strategies is model size relative to device memory, at roughly 36B parameters for an 80 GB card. Below that wall, compression dominates and extra GPUs are largely wasted spend; above it, tensor parallelism stops being a choice and becomes an entry ticket: Llama-2-70B is infeasible on one A100 at any KV setting, …

Vollständiger Originalartikel ↗

• Betroffenheit im eigenen Stack prüfen: Versionen/Komponenten abgleichen.
• Originalquelle / Hersteller-Advisory lesen: https://arxiv.org/abs/2608.23962
• Verfügbaren Patch oder Workaround einspielen und dokumentieren.